We always insist on taking quality and technological innovation as the core competitiveness of enterprise development. We have won praises from customers all over the world for our excellent small range motion presence sensor, foot padal switch, High Sensitivity Wave To Open Wireless Switch quality and efficient service. Since its inception, we have been in line with the principle of good faith management, and actively forge ahead, the courage to open up, fully absorb domestic and foreign technology, set all the strengths. We take social responsibility as our honor and enhancing our economic strength as our purpose. The company insists on quality management, lean production, optimized production mode, and continuously improves product quality and rapid response capabilities. We sincerely expect exchange and cooperation with you.

Safety Beam Sensor

This revolving door presence safety curtain sensor, can accurately detect the moving or fixed human body and objects, avoid all kinds of rotating automatic sensing door or swing door from colliding with body or objects, to ensure the safety of people and equipment, widely used in automatic revolving door safety presence occasions.

Product Overview

1 Aluminum housing

2 Sensor*2

3 End cover*2

4 Front cover(filter glass)

5 Mounting brackets*2

6 Cross-recessed screws*2

7 Connection terminal

8 Indicator light

9 Background set switch

10 Scanned area regulating wheel

11 Transmit cabin

12 Receive cabin

13 Wire interface*2

NOTE: The left or right end cover may need to remove according to its application. Loosen the screws to remove end cover, then front cover can be removed.

Characteristics

1, It can detect moving or standing people or objects, keep safety when people or equipment enter from rotation door or automatic swing door.

2, Ingenious structure, simple but modern appearance. And very easy to install.

Application

Four size can be available:

620x31x20mm

750×31×20mm

900×31×20mm

1200×31×20mm

Installation

1, Remove the screw. Then take the bracket holder and sensor out from aluminum case carefully.

2, Install the aluminum case on the door leaf.

3, The screws must be removed before connect the mounting brackets to main case. Put the sensor into case and tighten the 2 mounting brackets to sensor.

4, Start the sensor after finish all installation. Use a piece of paper(A4 or 8.5*11 inch) or

your hand to test the detection area.(The LED light will from blue turn to red.)

5, Slide the sensor to adjust the detection area (Mounting bracket should be opened).

6, After finish all settings, lock the screws in mounting bracket tightly to stabilize the sensor.

7, After finishing the installation of sensor, put the front cover onto aluminum case. Close the front cover and use the screw to fasten.

To reach a mutual profit of our customers, suppliers, the society and ourselves for Automatic Sliding Door Motor for Wood Door, Automatic Door. Our company has professional design and R & D, forge ahead, pursue excellence and make progress. Our subconscious development and sincere service have laid the foundation for the sustainable development of the enterprise and established a good reputation.

Hot Tags: revolving door presence safety curtain sensor, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample, black square push switch, electric elevator door sensor, Wireless Touchless Switch, radar opening sensor, Infrared Motion Sensor, office automation sensor