We have been dedicated to the development and production of stainless steel lock switch, Pet Presence Sensor, touch switch for sliding door with focus and persistence, and constantly improve the ability to pursue sustainable development and challenge beyond ourselves. The humanistic spirit highly recognized in our traditional culture must be inherited and constantly updated in combination with the current environment. We actively advocate and adhere to the spirit of integrity, win-win and innovation, and have been widely approved by domestic and foreign partners and customers, and our company has achieved rapid development. In the course of future development, we are willing to cooperate with domestic and foreign partners for mutual benefit and become the most trustworthy partner for customers. Our company focuses on technological innovation and artificial innovation.

Safety Beam Sensor

For the automatic door, Safety in use is very important. Our model 227 safety infrared top scan light curtain for swing door, it is specially designed for the anti-pinch safety of revolving doors and swing automatic doors. The detection will be performed by projecting infrared light spots. When a human body is detected, it will send a signal and the door automatically stop to open or close to prevent the pedestrian from being pinched.

Product Overview

Characteristics

1, The detection height and sensing area are adjusted by adjusting wheel and locking the screws, quickly and accurately.

2, The system has strong pressure stability, with background and noise filtering system, not affected by environment (such as sunshine, snow, rain, etc).

3, The detection angle of scanning can be accurately adjusted by mounting bracket.

Application

This model mainly used for automatic swing door or revolving door.

Four size can be available:

620x31x20mm

750×31×20mm

900×31×20mm

1200×31×20mm

Installation

1, Remove the screw. Then take the bracket holder and sensor out from aluminum case carefully.

2, Install the aluminum case on the door leaf.

3, The screws must be removed before connect the mounting brackets to main case. Put the sensor into case and tighten the 2 mounting brackets to sensor.

4, Multiple sensors can be connected to each other with side-by-side wires. Operation voltage and relay output need to connect to any of sensor only once.

5, Use adjusting wheel adjust scan area. Set the scanning range to 25cm above the ground.

6, Use the ratchet pawl in mounting bracket to set angle of Inclination.

7, After finishing the installation of sensor, put the front cover onto aluminum case. Close the front cover and use the screw to fasten.

Our company has been producing reliable Automatic Water Cascading Retort/Sterilizer/Autoclave for Glass Jars/Pet Food/Infant Food for many years, and we welcome new and old customers to visit us. We have established a high quality, highly dedicated sales team with many years of production experience and advanced technical equipment, so that our factory has reached a high technology, high efficiency and high quality development level. Our company uses modern logistics theory, through scientific organization and whole process monitoring, to provide the best service and preferential tariff.

Hot Tags: infrared top scan light curtain for swing door, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample, Embedded Mini Motion Detector for Sliding Door, Small Size Contactless Door Lock Switch, infrared anti pinch sensor, contactless locked switch for hospital, Human Figure Recognition Smart Door Sensor, sensor beam