Our production scale of family sign switch set, Integrated Auto Gate Foot Sensor Switch, round hand wave switch is very large, and we have modern production plants. Because of professionalism, we can provide users with the products and services they need. We have achieved a leading position in the industry by virtue of our professionalism and persistence in our products, as well as meticulous and considerate service of integrity. We are fully implementing our responsibility for energy conservation and emission reduction, continuously improving environmental protection and strengthening social responsibility management.

Safety Beam Sensor

This revolving door presence safety curtain sensor, can accurately detect the moving or fixed human body and objects, avoid all kinds of rotating automatic sensing door or swing door from colliding with body or objects, to ensure the safety of people and equipment, widely used in automatic revolving door safety presence occasions.

Product Overview

1 Aluminum housing

2 Sensor*2

3 End cover*2

4 Front cover(filter glass)

5 Mounting brackets*2

6 Cross-recessed screws*2

7 Connection terminal

8 Indicator light

9 Background set switch

10 Scanned area regulating wheel

11 Transmit cabin

12 Receive cabin

13 Wire interface*2

NOTE: The left or right end cover may need to remove according to its application. Loosen the screws to remove end cover, then front cover can be removed.

Characteristics

1, It can detect moving or standing people or objects, keep safety when people or equipment enter from rotation door or automatic swing door.

2, Ingenious structure, simple but modern appearance. And very easy to install.

Application

Four size can be available:

620x31x20mm

750×31×20mm

900×31×20mm

1200×31×20mm

Installation

1, Remove the screw. Then take the bracket holder and sensor out from aluminum case carefully.

2, Install the aluminum case on the door leaf.

3, The screws must be removed before connect the mounting brackets to main case. Put the sensor into case and tighten the 2 mounting brackets to sensor.

4, Start the sensor after finish all installation. Use a piece of paper(A4 or 8.5*11 inch) or

your hand to test the detection area.(The LED light will from blue turn to red.)

5, Slide the sensor to adjust the detection area (Mounting bracket should be opened).

6, After finish all settings, lock the screws in mounting bracket tightly to stabilize the sensor.

7, After finishing the installation of sensor, put the front cover onto aluminum case. Close the front cover and use the screw to fasten.

Our Elevator Parts Elevator Door Sensor Safety Light Curtain for Lift represents our dedication to our products, as well as our hard work and pioneering spirit. We firmly believe that leading technology, honest service and scientific management are the cornerstones towards success. We practice the concept of sustainable development and continuously lead the industry towards a green, intensive and innovative development model.

Hot Tags: revolving door presence safety curtain sensor, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample, smart infrared motion sensor, Touchless Switch, stainless steel lock switch, non touch exit switch, wireless push button switch, Wired Wireless Pressure Smart Floor Mat