We continue to strengthen the updating of hardware equipment and the improvement of staff ability, starting from the management, reduce costs, so that more customers can enjoy our high-quality service and get our high-quality and low-cost infrared sensor exit button, wireless door opening button, function controllor for smart gate universal. Our company uses modern management mode to combine advanced technology, thoughtful service and humanistic spirit to serve all walks of life. Since the establishment of the company, what has supported the development of our company is a corporate culture that focuses on new possibilities that others have not paid attention to, and constantly challenges ourselves to achieve this goal.

Safety Beam Sensor

This revolving door presence safety curtain sensor, can accurately detect the moving or fixed human body and objects, avoid all kinds of rotating automatic sensing door or swing door from colliding with body or objects, to ensure the safety of people and equipment, widely used in automatic revolving door safety presence occasions.

Product Overview

1 Aluminum housing

2 Sensor*2

3 End cover*2

4 Front cover(filter glass)

5 Mounting brackets*2

6 Cross-recessed screws*2

7 Connection terminal

8 Indicator light

9 Background set switch

10 Scanned area regulating wheel

11 Transmit cabin

12 Receive cabin

13 Wire interface*2

NOTE: The left or right end cover may need to remove according to its application. Loosen the screws to remove end cover, then front cover can be removed.

Characteristics

1, It can detect moving or standing people or objects, keep safety when people or equipment enter from rotation door or automatic swing door.

2, Ingenious structure, simple but modern appearance. And very easy to install.

Application

Four size can be available:

620x31x20mm

750×31×20mm

900×31×20mm

1200×31×20mm

Installation

1, Remove the screw. Then take the bracket holder and sensor out from aluminum case carefully.

2, Install the aluminum case on the door leaf.

3, The screws must be removed before connect the mounting brackets to main case. Put the sensor into case and tighten the 2 mounting brackets to sensor.

4, Start the sensor after finish all installation. Use a piece of paper(A4 or 8.5*11 inch) or

your hand to test the detection area.(The LED light will from blue turn to red.)

5, Slide the sensor to adjust the detection area (Mounting bracket should be opened).

6, After finish all settings, lock the screws in mounting bracket tightly to stabilize the sensor.

7, After finishing the installation of sensor, put the front cover onto aluminum case. Close the front cover and use the screw to fasten.

We adhere to the principle of 'credit and honest management', adhere to the tenet of 'quality first, customer first', and constantly strengthen the technical force to ensure the quality of Enter and Exit Infrared Sensor Swing Turnstile Gate. Just one phone call from you, our pre-sale service system will start and we will serve you wholeheartedly. We are firmly committed to an all-round development strategy and strive to improve the quality of our products and online operation capabilities.

Hot Tags: revolving door presence safety curtain sensor, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample, toilet bathroom touch button, commercial door sensor, Infrared Combined Sensor, unidirectional detector, human detection motion sensor, double lock switch for dressing room