Opening And Safety Sensor Solution For Automatic Doors

 CANBO 506&507 Series   Opening and Safety Sensor Solution for Automatic Doors

This type of sensors are both motion and safety functions, used for automatic sliding doors. M-507 all functions by infrared technology. M-506 opening and safety sensor by microwave radar and active infrared technologies

When people approaching to the automatic door, microwave modules detect movement and send the signal to open the door. While infrared light detects and maintains the safety of the moving area of the door and the threshold fields. Once someone or an object stays in the area of the door, a signal will be sent to the automatic door, causing it to stop or reverse its movement.

The dual-technology combination sensors have obtained CE certification and meet the EN16005 standard, as well as the ISO 13849 and EN IEC 61000 standards.

Power Input: AC/DC 12~30V(10%)
Cable length: 2.5m
Signal output: Relay, 1 way motion, 1 way safety (NO/NC optional)
Max installation height: 3000mm
Static current: 39mA(DC12V power)
Action current: 105mA(DC12V power)
Material: Optical surface with PMMA, shell with ABS
Ray type: Infrared modulated light
Ray source: infrared 940nm
Light beam(Normal mode): 2 way safety, 6 transmitting,24 light spot; 1 way motion and safety, 3 transmitting, 12 light spot;2 way motion, 6 transmitting, 24 light spot
Light beam(Street mode): 2 way safety, 6 transmitting, 24 light spot; 1 way pre-motion, 3 transmitting, 12 light spot
Self-learning time: Dynamic stability learning for 8s
Temperature: -25C~55C
Detection range: Maximum width 2500mm, hand wave to open distance 80~170mm(Mounted height=2.5 meters)
Output maintain time: safety 1.2s, motion 2s
Respond time: 150ms
Background update time: 15s, 1min, 30min, not update, 4 levels optional
Operation display(Normal mode):Learning background: Green LED flashes; Standby state:Green LED is always on;
Motion: Yellow LED is on; 1st&2nd row safety: Red LED flashes; 3nd row safety: red light is on.
Operation display(Street mode): Learning door opening background: Green LED flashes; Learning door closing background: Yellow LED flashes;Standby state: Green LED is always on; Motion: Red LED is on; 1st&2nd row safety: Red LED flashes
Dimension: 268(L)x61(W))x38(H)mm(exclude bottom shell)

After measuring and confirming the installation location, drill the holes.
Open the outer cover and fix the sensor in place using screws on the door head.
According to the wiring diagram, wiring and power on
After adjusting the parameters in sequence, close the outer cover.

Induction range adjustment:
The width and depth of the microwave/infrared sensing range can be adjusted using the provided adjustment tools. Rotate clockwise to move away from the door panel and counterclockwise to move closer to the door panel.

Dial switch adjustment:
In sequence, they are background update time, start/interlock normally open/normally closed, sensitivity of sensing, adjacent installation A/B channels, blue zone, test signal, fifth row/fourth row infrared light adjustment.

Based on the actual on-site environment, the optimal parameters should be adjusted. For detailed information, please refer to the manual and our product installation video.

We are a profressional manufacturer of the access control system in automatic door field with 20 years expearience. Our developed products include:
1) motion and safety sensors for automatic doors
2) switches and keypads for automatic doors
3) smart lock devices
4) others access control accessories

Any demands or questions, please contact us freely.

Hot Tags: opening and safety sensor solution for automatic doors, China, suppliers, manufacturers, factory, customized, wholesale, price, quotation, in stock, free sample